Symposium Acoustics Segue Platform (19x21)

Dimensions and Weight

The Segue is 1.625" (1 5/8") or approximately 4 cm thick; a standard 19x14 (48cm x 35.5cm) platform weighs approximately 7 lbs (approximately 3.2 kG). While our popular size roster for platforms (see below) is still in effect, the Segue can be ordered in virtually any size needed for special applications or to fit into specific areas.

The Technology

The Segue is a streamlined version of our time-tested Super, Super Plus and Ultra Platforms, and achieves its goals in like manner by using stepped-density layers carefully bonded together to form a resonance-free absorptive engine for the dissipation of vibratory energy. The top layer is anodized aluminum; the bottom layer is a special composite consisting of bonded wood elements. A heat-exchanging center section serves to convert mechanical energy into sonically harmless heat energy, and provide effective, resistive isolation between the support surface and the component in use. The Segue, like all Symposium products, reduces or eliminates vibration neutrally, and will not convert it into a different, more "euphonic" form as is done by products which employ compliant polymers, sorbothanes, and similar materials.

Weight Capacity

On flat surfaces: The Segue shares the high weight capacity of all Symposium platforms and has moderate cantilever strength. Placed flat upon a uniform support surface (such as a shelf, table, floor, etc.), it has a theoretical weight limit of several hundred pounds (>150 kG) or more.

When placed on top of cones, rack posts, etc: When only supported at three or four contact areas (such as couplers, cones, vertical rack legs, etc), very high weight loads (greater than 100 pounds or about 45 kG) should be avoided. With moderately heavy weight loads of more than about 40 pounds (18 kG), the support contacts should be placed or located directly beneath and inside the footprint of the load itself, and not outside the load's perimeter.